Are you encountering difficulties while setting up your Netgear Orbi and experiencing issues with firmware updates? Is the firmware download taking an unusually long time? If both questions have an affirmative answer, it could suggest that the firmware on your WiFi device is corrupt. Alongside this, there may be other factors contributing to the update problems with your Netgear Orbi setup. Let’s closely examine some of these potential causes:
- The distance between your Orbi router and satellite might be too far.
- Your internet connection may not be strong enough to support the firmware update process.
- It’s possible that you downloaded an incorrect firmware file.
- The hardware of your Netgear Orbi device might be damaged.
These are the primary factors contributing to the failure of the Netgear Orbi firmware update. Understanding the underlying reasons will assist you in resolving the issue more effectively.
Fix: Netgear Orbi Firmware Update Failed
Step 1: Download the Correct Firmware File
To ensure successful firmware updates, it is crucial to download the correct firmware file. Many users make the mistake of being careless during the download process. However, you can rectify this easily. Pay close attention while downloading the firmware and ensure that you enter the correct model number of your Orbi device to download the corresponding firmware version.
Step 2: Check Your Internet Connection
Weak internet connection is a common cause for firmware update failures. Verify that your Orbi router and modem are properly connected. If you are using a wireless connection, consider using an Ethernet cable for a more stable connection. If the internet issue persists even after connecting with a cable, it is advisable to contact your Internet Service Provider (ISP) for assistance in resolving the issue.
Once your internet connectivity is resolved, access orbilogin.com and attempt to update the firmware of your WiFi device. If you still encounter difficulties, it may be necessary to perform a factory default reset as a final troubleshooting step.
Therefore, follow the step-by-step guidelines mentioned below to restore your Orbi to its factory default settings:
- Power on your Netgear Orbi router.
- Connect it to the modem using a cable.
- Then, press the Sync button on your Orbi router as well as satellite.
- Give your device some time to get synced.
- Next, access the Netgear Orbi router login page.
- Go to Advanced > Administration > Erase > Restore to factory default settings.
- In a minute or so, your device will get restored to its default mode.
After resetting your Netgear Orbi device, set it up, and perform Orbi firmware update. This time, you ought to be able to complete the process successfully.
Here are instructions that you need to go through to update the firmware of your WiFi device:
- Open a new tab in your web browser.
- Perform Netgear Orbi router login by referring to the steps given in the manual.
- Navigate to Settings > Firmware Update.
- Download the correct firmware file and follow the on-screen instructions to update your Netgear Orbi device.
Hence, these are the hacks that you can use to fix the firmware update failed issue in a hassle free manner. However, you can also use these tips in case you face the same issue in Orbi 860 model.
Once the issue is resolved you will able to enjoy the blazing fast speed of internet along with also get the new features that enhance the internet experience.
