Wavlink Aerial X AC1200 Extender Setup

Simply plug your Wavlink Aerial X AC1200 extender setup  into a power outlet and use a computer or mobile device to connect to its Wi-Fi network to get it set up. Following that, launch a web browser and type the default IP address of the extension into the address box. Use the standard username and password to log in, these are often “admin” for both. To pick out and input the password for your current Wi-Fi network, simply follow the setup tutorial.

Instruction Guide for Wavlink Aerial X AC1200 Setup

  • A power supply ought to be attached to the Wavlink Aerial X AC1200.
  • Connect it to the Wi-Fi network of the extender (usually called “Wavlink_EXT”).
  • Open a web browser and enter the extender’s default IP address, the address bar.
  • Use the default password and username to log in, which tends to be “admin” for both.
  • Complete the setup wizard by selecting your present Wi-Fi network .
  • entering its password, as required by the on-screen instructions
  • As desired, modify variables such the network name and password.
  • Wait for the extender to restart, and you’re done!

Trobleshotting Tips for wavlink Aerial X AC 1200 setup

  • Verify that it is turned on and safely plugged in. If needed, connect it into a different outlet.
  • For the optimal performance, put the extender so it is within the Wi-Fi signal range of your router.
  • Try resetting your router and the extender . 
  • Restarting the device could sometimes resolve connectivity issues.
  • Confirm that your extender has any firmware updates available. 
  • Using a most recent firmware update can fix issues and enhance function.
  • You can restore the extender to its exact factory settings if the problem persists
  • .usually this entails holding up the reset switch for a short while. 
  • Check again the data you supplied during setup.
  • both the password and Wi-Fi network name (SSID).

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is ap wifi extender setup

Useful feature of wavlink Aerial X AC 1200 setup

  1. The Wavlink Aerial X AC1200 setup’s one-button WPS (Wi-Fi Protected Setup) capacity is one handy feature.
  2. This feature allows for easy to join your extender to the current WiFi network. 
  3. need to manually configure settings or opinions passwords.
  4. To enable WPS, just struck the router’s WPS button and then the WPS button.
  5. the extender in a certain period of time
  6. The devices will easily increase your Wi-Fi coverage by automatically forming a secure connection.
  7. Set up is quick and easy with this reduced method, even for non-technical people.

Common issue for wavlink Aerial X AC 1200 extender setup

  •  remove the Wavlink Aerial X AC1200 extender from the power outlet so as to start the power cycle.
  • to ensure a full power cycle, let the extender  sit unplugged for at least thirty seconds.
  • Wait for the extender to fully charge before plugging it back into the electric socket.
  • Try returning the extender to its factory settings if the issue still occurs.
  • Find the extender’s reset button,
  • then press it for ten or so seconds so that the LED lights flash.
  • To reset the extender and link it to your Wi-Fi network, start the setup process again after resetting.

Wavlink Aerial X AC 1200 Setup-Manual Guide

  • After plugging the Aerial X Extender into an electrical socket, wait for it to turn on.
  • Go to the “Wavlink_EXT” network in your computer’s or mobile device’s Wi-Fi settings. 
  • The web browser on the related device should open.
  • Enter or ap.setup in the address field and hit Enter.
  • Enter your typical credentials to log in.
  • Via the setup wizard, you will be led through the process. 
  • Click “Next” after choosing your preferred language.
  • Click the WiFi network you are using right now from the list.
  • then enter the password. Click “Next.”
  • You can adjust the extended network’s settings to suit your needs or keep them as they are.
  • Link your devices to the enlarged Wi-Fi network .
  • the provided SSID and password.
  • Click “Finish” to close the setup process.

Wavlink Aerial AC1200 Extender Setup using the WPS button

  • Attach the extender to a power source.
  • You should be pulling the WPS button on the extender 
  • Within two minutes, press the WPS button on your WiFi router.
  • When the correct connection is made, look for the extender’s WPS LED to turn solid.
  • If required, reposition the extender for optimal coverage.
  • You should be able to join your devices to the larger Wi-Fi network.
  • After setting up the Wavlink Aerial X AC1200 Extender .
  • the WPS button, your devices must be able to join the larger Wi-Fi network.

How do I login Wavlink AC1200 Extender Setup?

  • One can launch a web browser.
  • The IP address of the Wavlink Aerial AC1200 Extender is 
  • You can also type an extender setup.
  • Because ap.setup allows users to input their username and password here
  • all users are admins.
  • You will find a simple way to access the options after that.

Wavlink Aerial X access point setup.

  • Attach the extender to a power source.
  • Link your gadget to the “Wavlink_EXT” wireless network.
  • Open a web browser and enter the default IP address of the extender.
  • which is usually “” or Ap.setup.
  • Use the default login data, which is often “admin” as the username and password.
  • Select “Access Point” mode from the menu of options.
  • Follow the instructions presented on the screen to conclude the access point setup.
  • Having the Wavlink Aerial X AC1200 Extender configured as an access point, 
  • you can easily expand your network.

How do I reset Wavlink Aerial X Wifi Extender?

  1. Click the reset button on the extender. The label that reads “Reset” usually has a little hole in it.
  2. Press and hold the reset button with a paperclip or similar object for 10 to 15 seconds.
  3. Push the reset button as soon as the extender’s lights begin to blink.
  4. signifying a successful reset.
  5. Allow the plug-in to revert to its initial state. 
  6. It might take some time.
  7. Join the network of the extender and activate it using the proper options.

Leave a Reply

Your email address will not be published. Required fields are marked *